2017 DMS 5'x5'x36" 5 Axis CNC Router, very low hours.
RoutersExcellent condition, very low hour machine. Videos available.
RPM | 24,000 RPM |
Taper | HSK 63 |
# Axis | 5 |
X | 60" |
Y | 60" |
Z | 36" |
Control | CNC (Fagor 8055i) |
BASE MODEL MACHINE - 5-Axis short bridge moving table machine featuring a 5 foot/1.5 meter by 5 foot/1.5 meter aluminum table machined flat and configured with 3/8 inserts on 12 inch/.30 meter centers. Machine is capable of rapid feed rates of 1800 inches/46 meters per minute and rotational speeds of 8000 degrees per minute.
This machine is constructed of a rigid, fabricated steel base, utilizing heavy gauge steel tube and plate weldment construction throughout. All structural members are stress relieved for maximum stability, and all surfaces that mount precision components are precision ground and/or machined. All linear axes are equipped with profile ways and laser aligned and compensated for positional accuracy.
X-AXIS - X-axis is the bridge axis which is driven by a spinning ball nut and recirculating ball screw assembly
spanning the 5 foot/1.5 meter dimension from left-to-right across the workspace. Maximum travel is 72 inches. Actual travel may vary based on options selected.
Y-AXIS - Y-axis is the moving table axis which is driven by a spinning ball nut and recirculating ball screw assembly spanning the 5 foot/1.5 meter dimension from front-to-back across the workspace. Maximum travel is 72 inches. Actual travel may vary based on options selected.
Z-AXIS -Z-axis travel is 36 inch/.90 meter and is driven by a recirculating ball screw assembly. Maximum feed rate is 1000 inches/25 meters per minute.
C-AXIS (4th axis) - C-axis rotates parallel to the table utilizing a Cycloidal gear reducer with a travel range of +/- 363 degrees. Upgrade to Continuous C axis rotation with roll over C-Axis at 360 degrees feature for more than 12hp spindles utilizes a slip-ring design for the most complex CAD/CAM machining applications resulting in increased machining & programming efficiency. This option requires an incremental encoder on the C and B axes. (Note: 460V Required)
B-AXIS (5th axis) - B-axis rotates perpendicular to the table utilizing a Cycloidal gear reducer with a travel range of +/- 115 degrees.
CONTROL SYSTEM - Fagor 8055i Power-M with 512MB of compact flash memory, 10.4" high resolution color LCD monitor, USB and serial ports, 3D solid graphics, TCP/IP Ethernet & loaded basic functions, including Retrace, Telediagnostics & TCP with a complete set of Fagor manuals on CD.
SPINDLE - 16.1hp/12kW 380V HSK 63F short nose HSD ATC spindle, max speed 24,000 rpm, S1 continuous
rate 10kW/13.4hp. Spindle is liquid cooled with a heat exchanger and DMS cast yoke. A frequency inverter with electronic braking is used to program the spindle speed to 24,000 rpm. The holders used on this spindle are HSK63F. With HSK 63FxER32 tool holders, the collet range is from 1/8 inch to 3/4 inch. With HSK 63FxER40 tool holders, the collet range is from 1/8 inch to 1 inch. Must use 24,000 rpm rated tool holders.
TOOL CHANGER - A 12 position carousel mounted on the right column. The carousel is servo-driven by the
controller for automatic tool changes. Maximum tool size: 3.50" diameter and 8" length from spindle face to tool tip.
VACUUM PUMP - Becker Vertically Stackable Vacuum System. Two Each Rotary Vane Pumps with stands,
electric motors, inlet check valves, isolation valves, vacuum gauges and connected to a common manifold with single inlet filters. VTLF 2.25, 12.5Hp, 173 CFM, @ 27" HgV at sea level, 230/460 volt, 3-phase. Ideal for locations above 2,500 feet elevation. Client is responsible for electrical connection and plumbing to machine